Port Arthur waterfront properties on Sabine Lake and the Gulf Intracoastal Waterway face some of the most demanding seawall conditions on the Texas coast. Constant GIWW commercial traffic generates industrial-scale wake, Sabine Lake's open basin produces significant wind waves, and Gulf hurricane surge risk is among the highest of any Texas coastal community. Port Arthur took direct hits from both Rita in 2005 and Ike in 2008.
Compare materials and starting prices on our seawalls page.
Soft bay mud and clay soils dominate Port Arthur's waterfront, with significant industrial fill in developed areas from petrochemical operations. These very soft near-surface soils require seawall pilings driven to adequate bearing below, and salt water exposure demands marine-grade materials throughout. Concrete and vinyl seawalls with galvanized or stainless hardware are required for Port Arthur's demanding environment.
Shore Protect Team LLC builds and repairs seawalls on Sabine Lake, the GIWW, and associated waterways in Port Arthur.
Request a free consultation for your Port Arthur seawall project. Site photos allow us to assess industrial wake exposure, surge risk, and soft soil conditions before recommending wall design.
We also work upriver in Port Neches, on the Neches River between Port Arthur and Beaumont, where riverfront walls deal with current, floods and wake from vessels on the waterway.

labor and materials
Wood seawalls are not recommended anywhere on Port Arthur's industrial waterfront. The combination of GIWW commercial wake, Sabine Lake wave exposure, salt water, and Rita and Ike surge history makes wood the least viable seawall material in this demanding Southeast Texas coastal environment.

labor and materials
Vinyl seawalls for Port Arthur residential Sabine Lake and protected channel properties where salt water exposure, commercial navigation wake, soft bay mud soils, and Gulf hurricane surge risk require a marine-grade material with deep piling to competent bearing.

labor and materials
Concrete seawalls for Port Arthur GIWW-adjacent and Sabine Lake open-water properties where industrial vessel wake, large basin wave fetch, salt water, Rita and Ike surge history, and soft bay mud require maximum structural capacity with marine-grade reinforcement.

labor and materials
Stone and boulder seawalls for Port Arthur higher-elevation residential properties where grade changes and firmer fill soils allow natural permeable revetment construction away from the most demanding GIWW and Sabine Lake wave exposure.

labor and materials
Gabion seawalls for Port Arthur tidal margin properties where flexible construction handles very soft bay mud soils, salt water tidal saturation, and the combined forces of GIWW commercial traffic and Sabine Lake wave exposure in this major port community.

labor and materials
Seawall repair for Port Arthur properties — Rita and Ike surge structural damage, GIWW industrial wake fatigue, salt water hardware corrosion throughout, soft bay mud settlement beneath footings, and Sabine Lake wave damage are the primary repair needs.


Port Arthur sits on the west shore of Sabine Lake, and the open lake produces wind waves that hit lake-facing lots directly.
Very. The city sits low and close to the Gulf and has been hit hard by Rita in 2005, Ike in 2008 and the record rainfall of Harvey in 2017.
Yes. Ship and barge traffic on the channels near Port Arthur sends wake toward the shore.
Pleasure Island across the channel, canals and camps, and access to the nearby marshes.
Send us photos of your shoreline for a free preliminary assessment.