Marine Project Services in Sabine Pass, Texas

Support for new construction, repair projects and waterfront structure improvements

Low Ground on the Sabine Pass Waterway Near Sabine Lake

Sabine Pass is a Port Arthur neighborhood in the far southeastern corner of Jefferson County, about thirty miles southeast of Beaumont. It takes its name from the waterway of Sabine Pass, which runs between the Sabine Lake estuary and the Gulf, only a short distance from town. The town's highest ground stands about 8 feet above sea level.

With land that low and the Gulf that close, surge is the controlling load. Hurricane Rita came ashore over Sabine Lake in 2005, and its surge destroyed more than 90 percent of the structures in Sabine Pass. Three years later, Hurricane Ike pushed a 22-foot surge here, the highest ever recorded at the Sabine Pass station, and wiped out nearly every home in town. Waterfront structures on a site like this should be planned to be submerged and hit by debris at some point. Long piling embedment, decking that can shed water and walls with protected backfill hold up better than light, shallow work.

We provide Marine Project Services in Sabine Pass, TX for bulkheads, seawalls, retaining walls, piers, docks and boat slips. Marine pilings are a big part of most jobs here, and we also repair and maintain structures that have come through past storms.

Share the Sabine Pass address and photos of the shoreline. In return you will receive a free preliminary estimate.

Marine Project Services in Sabine Pass, Texas

Bulkhead Construction and Repair in Sabine Pass, TX

Bulkheads for Sabine Pass banks that can take overtopping by surge

Marine Project Services in Sabine Pass, Texas

Seawall Construction and Shoreline Protection in Sabine Pass, TX

Seawalls and shoreline protection for low ground along the Sabine Pass waterway

Marine Project Services in Sabine Pass, Texas

Retaining Wall Construction in Sabine Pass, TX

Retaining walls for Sabine Pass lots built up above the waterline

Marine Project Services in Sabine Pass, Texas

Pier Construction and Installation in Sabine Pass, TX

Piers off Sabine Pass and Sabine Lake frontage on deep pilings

Marine Project Services in Sabine Pass, Texas

Dock and Boat Slip Construction in Sabine Pass, TX

Docks and boat slips in Sabine Pass with framing meant to ride out surge

Marine Project Services in Sabine Pass, Texas

Marine Piling Installation Services in Sabine Pass, TX

Marine pilings for Sabine Pass structures, embedded deep for storm loads

Marine Project Services in Sabine Pass, Texas

Waterfront Structure Repair and Maintenance in Sabine Pass, TX

Repair of storm-worn docks and walls along Sabine Pass and Sabine Lake

Marine Project Services in Sabine Pass, Texas

Trust the Professionals!

Get a Free Consultation and Preliminary Cost Estimate
Marine Project Services in Sabine Pass, Texas

Frequently Asked Questions About Marine Project Services in Sabine Pass, TX

How high has storm surge reached at Sabine Pass?

Hurricane Ike produced a 22-foot surge at Sabine Pass in 2008, the highest ever recorded at that station. That is why piling depth and connection strength get so much attention here.

Does a bulkhead make sense on land only 8 feet above sea level?

A bulkhead can hold the bank and stop daily erosion, but it will not keep out a major surge. We design it so it survives being overtopped.

Can you build a dock on the Sabine Pass waterway that survives storms?

No dock is storm-proof, but deep pilings, through-bolted framing and decking that lets water pass improve the odds a great deal.

Do you work on the Sabine Lake side as well?

Yes. We look at frontage on Sabine Lake and on the pass, and design for the exposure at each site.

What do you need for a Sabine Pass estimate?

An address, photos of the site and a few words on what you want. You get a free preliminary estimate in return.

Close
Close
loading